The PGST PG107 is the advanced alarm panel of the PGST range, wirelessly controlling sensors, cameras, sirens, and accessories for complete home security with no cabling.
PGST
Alarm · Camera · Sensor · Siren
Smart Wireless Home Security — Available on Amazon & AliExpress
ALARM SYSTEMS
CAMERAS
SENSORS & ACCESSORIES
SIRENS
PGST PG107 : wireless alarm panel overview
The PGST PG107 alarm panel is the central hub of your PGST security system. It controls all wireless accessories — door sensors, PIR detectors, indoor and outdoor sirens, cameras, and SOS buttons — without any wiring between devices. Alerts are sent by phone call, SMS, and push notification via the PGST app.
The panel is battery-backed to remain operational even during a mains power cut. Setup is straightforward: pair each accessory by radio, configure alert numbers, and arm the system from the panel or the PGST app on your smartphone.
PGST PG107 : arming modes and features
The PG107 supports multiple arming modes: full arm (all zones active), perimeter arm (entry points only), and disarm. This flexibility lets you adapt protection to your situation — away from home, at home at night, or during the day. Remote arming and disarming is available via the PGST app.
PGST PG107 : installation and setup
Place the panel in a central, protected location in your home for maximum radio range to all accessories. Pair each PGST device using the guided pairing procedure, configure your emergency contact numbers, then run a full system test. No specialist skills or tools are required for installation.
5 key takeaways about the PGST PG107
- Wireless hub: controls all PGST accessories without any wiring.
- Multi-mode arming: full, perimeter, or disarmed — adapts to any situation.
- Multi-channel alerts: phone call, SMS, and push notification via the PGST app.
- Battery backup: continues operating during mains power cuts.
- DIY installation: no technician required, guided pairing for all devices.
FAQ — PGST PG107 alarm panel
How many accessories can I connect to the PGST
The number of supported zones and accessories depends on the PG107’s specifications. Refer to the product documentation for the exact maximum capacity.
Does the PGST PG107 work without internet?
Phone call and SMS alerts work independently of an internet connection (via GSM or fixed line, depending on the model). The PGST app requires internet for remote management features.
Can I manage the PGST PG107 from my smartphone?
Yes. The PGST app lets you arm, disarm, receive alerts, and check system status from anywhere, on both iOS and Android.
Is the PGST PG107 compatible with all PGST accessories?
Yes. The PG107 is compatible with the full PGST range: door sensors, PIR sensors, indoor and outdoor sirens, cameras, and SOS buttons.
Also in the PGST range
Pair your PG107 panel with the PGST door sensor to secure every entry point. Enhance detection with the PGST indoor siren. Complete your setup with the PGST indoor camera.
