The PGST PG103 is the entry-level alarm panel of the PGST range, wirelessly controlling sensors, cameras, sirens, and accessories for complete home security with no cabling.
PGST
Alarm · Camera · Sensor · Siren
Smart Wireless Home Security — Available on Amazon & AliExpress
ALARM SYSTEMS
CAMERAS
SENSORS & ACCESSORIES
SIRENS
PGST PG103 : wireless alarm panel overview
The PGST PG103 alarm panel is the central hub of your PGST security system. It controls all wireless accessories — door sensors, PIR detectors, indoor and outdoor sirens, cameras, and SOS buttons — without any wiring between devices. Alerts are sent by phone call, SMS, and push notification via the PGST app.
The panel is battery-backed to remain operational even during a mains power cut. Setup is straightforward: pair each accessory by radio, configure alert numbers, and arm the system from the panel or the PGST app on your smartphone.
PGST PG103 : arming modes and features
The PG103 supports multiple arming modes: full arm (all zones active), perimeter arm (entry points only), and disarm. This flexibility lets you adapt protection to your situation — away from home, at home at night, or during the day. Remote arming and disarming is available via the PGST app.
PGST PG103 : installation and setup
Place the panel in a central, protected location in your home for maximum radio range to all accessories. Pair each PGST device using the guided pairing procedure, configure your emergency contact numbers, then run a full system test. No specialist skills or tools are required for installation.
5 key takeaways about the PGST PG103
- Wireless hub: controls all PGST accessories without any wiring.
- Multi-mode arming: full, perimeter, or disarmed — adapts to any situation.
- Multi-channel alerts: phone call, SMS, and push notification via the PGST app.
- Battery backup: continues operating during mains power cuts.
- DIY installation: no technician required, guided pairing for all devices.
FAQ — PGST PG103 alarm panel
How many accessories can I connect to the PGST
The number of supported zones and accessories depends on the PG103’s specifications. Refer to the product documentation for the exact maximum capacity.
Does the PGST PG103 work without internet?
Phone call and SMS alerts work independently of an internet connection (via GSM or fixed line, depending on the model). The PGST app requires internet for remote management features.
Can I manage the PGST PG103 from my smartphone?
Yes. The PGST app lets you arm, disarm, receive alerts, and check system status from anywhere, on both iOS and Android.
Is the PGST PG103 compatible with all PGST accessories?
Yes. The PG103 is compatible with the full PGST range: door sensors, PIR sensors, indoor and outdoor sirens, cameras, and SOS buttons.
Also in the PGST range
Pair your PG103 panel with the PGST door sensor to secure every entry point. Enhance detection with the PGST infrared sensor. Complete your setup with the PGST indoor camera.
PGST PG103 Panel: Entry-Level Wireless Home Protection
The PG103 is the entry-level model in the PGST range, designed to protect flats and average-sized houses effectively. It controls all PGST accessories — PIR sensors, door detectors, sirens, cameras and SOS buttons — via wireless 433 MHz communication. Installation is accessible without any technical skills: accessories pair with the panel in seconds, guided by the PGST app instructions.
When an alert is triggered, the PG103 sequentially contacts the emergency numbers you have programmed via voice calls and SMS messages. This notification is independent of your internet connection — it travels over the GSM/4G network of your SIM card, guaranteeing maximum reliability even during broadband outages. The backup battery maintains protection for several hours during mains power cuts.
Frequently Asked Questions — PGST PG103
What alert methods does the PG103 support?
The PG103 uses three complementary alert channels. Voice calls contact your emergency numbers sequentially until one answers and acknowledges the alert. SMS messages are sent simultaneously to all your emergency contacts, describing the event — zone triggered, time. Push notifications via the PGST app inform your phone if an active internet connection is available. These three channels operate in parallel to maximise the chance that the alert is received and acted on promptly.
Can I upgrade from the PG103 to a PG106, PG107 or PG108 later?
Yes, and this is one of the PGST ecosystem’s major advantages: all accessories are compatible with every panel in the range. If your needs grow and the PG103’s capacity is no longer sufficient, you can purchase a PG106, PG107 or PG108 and re-pair your existing accessories without replacing them. The pairing procedure remains the same regardless of the target panel. Your initial investment in accessories is fully preserved when upgrading.